FED Shop
Order FED documents and IPC guidelines on design, printed circuit board and assembly manufacturing conveniently at any time.
FED-Bibliothek Bd18-Englisch
FED Library of Knowledge Volume 18 - The New Proportional Land Dimensioning Concept
1st edition 2018, DIN A5, 71 pages, color, English
The difficulties that arise when processing printed circuit boards with land pattern that are too large have been the subject of many different working groups for many years. The current standards for land dimensioning, such as the IPC-7351B or the IEC 61188-5 series, require a fundamental revision, as they do not meet the component types used today with their ever smaller package designs, terminals and pitches. This volume 18 of the FED publication series "Library of Knowledge" presents a completely new approach to the calculation of SMD land dimensions on circuit boards and offers the user the following advantages:
• Easily scalable • Only two terminal classes • Easy adaptation also for future components • Failure-reduced assembly process • Risk minimization, e.g. bridging in paste printing • Higher reliability of the solder joints • Smaller land areas give more space for routing
The author Rainer Taube discusses the history of the standardization of SMD land pattern and the standards currently in force. This provides the reader with important background knowledge. In the course of his presentation, he explains the widely used IPC calculation model for land pattern. Based on these principles, he presents the New Proportional Land Dimensioning Concept he has developed. This is based on only two terminal classes, which in cover the entire SMD component spectrum. For the calculation of the lands a new IPC / FED reference calculator is available for download. A FED verification project was launched to ensure that the lands calculated according to the new proportional concept lead to acceptable solder joints that meet the requirements of J-STD-001 and IPC-A-610. A specially designed test board has land pattern of common SMD components according to IPC-7351B and the New Proportional Concept. Extensive photo material from the project documents the comparisons and highlights the final positive evaluation.
Author: Rainer Taube Editing: Dietmar Baar Cover picture: © Rainer Taube
4607 - Band18 Englisch
FED-Bibliothek Bd17-Englisch
FED Library of Knowledge Volume 17 - FED-Project: "Transition from rigid – flex area” final report
1st edition 2017, DIN A5, 26 pages, color, English
One area that is described incompletely in the current design rules and thus repeatedly leads to "grey areas" in technical specifications is the transition area "rigid to flex" for rigid-flex PCBs. The German Association for Design, PCB and Electronics Manufactury (FED), Working Group PCB has started a project to fix design rules for this area. In the present volume 17 of the BdW the final report of the project is published. It can be said that the test results obtained are not yet sufficient for design rules, but a number of design recommendations can be derived which have a significant influence on the quality and reliability of flex-rigid PCBs. A different bending cycle duration between ED electrolytic copper and RA rolled copper was found in the test samples. In the Flex to Rigid overlap area, different widths of 0.3mm / 0.5mm / 1.0mm were tested, with meaningful results. And where did the failures in the bending test occur in the test samples? In the flex or transition area? To be read in the present final report.
Editorial office: Dietmar Baar, FED e. V.
Cover photo: ATIS Bending Tester, Fraunhofer Institute - EFNT
4608 - Band17 Englisch
J-STD-033D (PDF) Single User English
Handling, Packing, Shipping and Use of Moisture, Reflow, and Process Sensitive Devices
Englisch. 32 pages. Stand: Januar 2018 (0330)
IPC-2591-Version 1.7-English (PDF) Single User
Connected Factory Exchange (CFX)
Englisch. 66 Seiten, Stand: Januar 2023
This standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. This standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical assembly and transactional processes. IPC-2591, Version 1.7 includes enhancements for closed-loop between AOI and SPI and fields added to Heartbeat to provide repeated active fault and recipe information in each message.
Show more Show lessIPC-CC-830C ENG (PDF) Single User
Qualification and Performance of Electrical Insulating Compound for Printed Wiring Assemblies
Englisch. 32 pages. Stand: Januar 2019. Keine Druckberechtigung, DRM-Schutz, !!!ACHTUNG!!! NENNEN SIE BEI DER BESTELLUNG DEN USER (NAME+E-MAIL)
The IPC-CC-830C standard establishes qualification and conformance requirements for electrical insulating compounds (conformal coatings). It has been designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy. The IPC-CC-830C standard covers: • The qualification and qualification retention of the conformal coating material (Table 3-1, Column A and B). • The quality conformance of conformal coating material properties (Table 3-1, Column C). For the purpose of this standard, the term conformal coating is used herein when referring to a type of protective coating for use on printed wiring assemblies. The conformal coating is intended to provide protection from moisture and contamination and provide electrical insulation; not as a sole source of mechanical support.
Show more Show lessJ-STD-075-A-EN Hardcopy
Classification of Passive and Solid State Devices for Assembly Processes
Englisch. 26 Seiten. Stand: 01.11.2022
EIA/IPC/JEDEC J-STD-075 picks up where J-STD-020 left off by providing test methods to classify worst-case thermal process limitations for electronic components. Classification is referenced to common industry wave and reflow solder profiles includin The classifications represent maximum process sensitivity levels and do not establish rework conditions or recommended processes for an assembler. IPC JEDEC J-STD-075A outlines a process to classify and label non-semiconductor electronic component’s Process Sensitivity Level (PSL) and Moisture Sensitivity Level (MSL) consistent with the semiconductor industry’s classification levels (J-STD-020, Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Devices and J-STD-033, Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices). Developed by ECIA, IPC and JEDEC.
Show more Show lessIPC-6011A-EN (PDF) Single User
Generic Performance Specification for Printed Boards
Englisch. 20 Seiten. Stand: 01.01.25
This specification establishes the generic requirements for printed boards associated with the IPC-601X series of performance specifications and their quality and reliability assurance requirements. The intent of this specification is to allow the printed board user and supplier flexibility to develop optimum procedures for the procurement and manufacture of printed boards. For use with IPC-6012 through IPC-6018. Supersedes IPC-6011.
Show more Show lessIPC-6011A-EN
Generic Performance Specification for Printed Boards
Englisch. 20 Seiten. Stand: 01.01.25
This specification establishes the generic requirements for printed boards associated with the IPC-601X series of performance specifications and their quality and reliability assurance requirements. The intent of this specification is to allow the printed board user and supplier flexibility to develop optimum procedures for the procurement and manufacture of printed boards. For use with IPC-6012 through IPC-6018. Supersedes IPC-6011.
Show more Show lessICP-4412C-EN (PDF) Single User
Specification for Finished Fabric Woven from "E" Glass for Printed Boards
Englisch. 28 Seiten. Stand: November 2021
The IPC-4412C covers the requirements for reinforcements woven from "E"glass yarn. These reinforcements are used in the production of prepregs, some of which are pressed into laminates. These prepregs and laminates are the base materials for rigid and mulitlayer printed boards. The IPC-4412C standard contains tables which describe each fabriic style in detail including the yarn used, the number of yarns per unit area, the basis weight and the thickness. The IPC-4412C standard also includes the quality assurance aspects of these strategic building blocks for base materials.
Show more Show lessIPC-4412C-EN (Hardcopy)
Specification for Finished Fabric Woven from "E" Glass for Printed Boards
Englisch. 28 Seiten. Stand: November 2021
The IPC-4412C covers the requirements for reinforcements woven from "E"glass yarn. These reinforcements are used in the production of prepregs, some of which are pressed into laminates. These prepregs and laminates are the base materials for rigid and mulitlayer printed boards. The IPC-4412C standard contains tables which describe each fabriic style in detail including the yarn used, the number of yarns per unit area, the basis weight and the thickness. The IPC-4412C standard also includes the quality assurance aspects of these strategic building blocks for base materials.
Show more Show lessIPC-4562B-EN (PDF) Single User
Specification for Metal Base Copper Clad Laminates for Printed Boards
Englisch. 43 Seiten. Stand: Oktober 2023
IPC-4562A standard covers metal unsupported foils and foils supported by carrier films suitable for subsequent use in printed boards. IPC-4562B addresses the requirements of metal foils used in printed wiring applications.
Show more Show lessIPC-2591-Version 1.3-English (Hardcopy)
Connected Factory Exchange (CFX)
Englisch. Stand: Januar 2021, 64 Seiten
The IPC-2591v1.3 standard establishes the requirements for the omni-directional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. This standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi-automated and manual, and is applicable to related mechanical assembly and transactional processes. IPC-2591, Version 1.3 provides updates to several IPC-CFX messages as well as mandatory and optional IPC-CFX message by equipment type.
Show more Show lessIPC-4556A (Hardcopy) - EN
IPC-4556 - Revision A - Standard Only: Specification for Electroless Nickel/Electroless Palladium Immersion Gold (ENEPIG) Plating for Printed Boards
Englisch, Stand: 2025, 49 Seiten
IPC-4556A Standard sets the requirements for the use of Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) as a surface finish for printed boards. IPC-4556A standard defines ENEPIG deposit thicknesses for applications including soldering, wire bonding, and as a contact finish.
Show more Show lessIPC-7093B (Hardcopy) - EN
IPC-7093 - Revision B - Standard Only: Design and Assembly Process Guidance for Bottom Termination Components (BTCs)
Englisch, 138 Seiten, Januar 2026
The IPC-7093B guideline provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093B provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.
Show more Show lessIPC-J-STD-001JA/A-610JA-EN (Hardcopy)
IPC-J-STD-001 and IPC-A-610 - Revision J - Addendum - Automotive: Automotive Addendum to IPC J‑STD‑001J Requirements for Soldered Electrical and Electronic Assemblies and IPC‑A‑610J Acceptability of Electronic Assemblies
English. 140 pages. Published Date: October 2025.
IPC J-STD-001JA/IPC-A-610JA is the automotive addendum to J-STD-001J and IPC-A-610J. It provides criteria to ensure the reliability of soldered automotive electrical and electronic assemblies in the field under harsh environments and considers automated high-volume production. IPC J-STD-001JA/IPC-A-610JA addendum is not a standalone document, and it must be used in conjunction with J-STD-001J and IPC-A-610J.
Show more Show lessIPC-2223F-ENG (Hardcopy)
IPC-2223 - Revision F - Standard Only: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards
Englisch. Stand: 2026 , 58 Seiten
Used in conjunction with the base IPC-2221 printed board design standard, IPC-2223 establishes the specific requirements for the design of flexible printed boards and forms of component mounting and interconnecting structures. The flexible materials used in the structures are comprised of insulating films, reinforced and/or non-reinforced dielectric in combination with metallic materials. Revision F provides new design guidance and requirements for mechanical and physical layout, usage of nonfunctional lands, coverlay access for surface mounting, conductor routing and tradeoffs between panel, pattern and button (pads only) plating for surface and hole copper plating.
Show more Show less